This is the latest recevied telemetry packets stored in our database for station/object SO2MK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789236091 | 35 Count | 1191 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789232489 | 23 Count | 778 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789228887 | 10 Count | 398 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789225285 | 38 Count | 1175 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789221683 | 25 Count | 788 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789218082 | 12 Count | 399 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789214480 | 43 Count | 1166 Count | 4 Count | 4.12 VDC | 0 VDC |
| 1789210878 | 30 Count | 779 Count | 4 Count | 4.12 VDC | 0 VDC |
| 1789207276 | 13 Count | 367 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789203676 | 63 Count | 1052 Count | 34 Count | 4.12 VDC | 0 VDC |
| 1789200042 | 35 Count | 656 Count | 18 Count | 4.12 VDC | 0 VDC |
| 1789196440 | 5 Count | 214 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789192836 | 58 Count | 812 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789189224 | 49 Count | 497 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789185620 | 41 Count | 433 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789182019 | 33 Count | 353 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789178417 | 25 Count | 260 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789171215 | 8 Count | 113 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789167613 | 2 Count | 43 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789164009 | 158 Count | 1000 Count | 54 Count | 4.12 VDC | 0 VDC |
| 1789160408 | 146 Count | 920 Count | 54 Count | 4.12 VDC | 0 VDC |
| 1789156805 | 133 Count | 818 Count | 53 Count | 4.12 VDC | 0 VDC |
| 1789153203 | 100 Count | 667 Count | 32 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)