This is the latest recevied telemetry packets stored in our database for station/object IU5CZO-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789136062 | 4.12 VDC | 35 C | 1023.5 hPa | 0 | 0 |
| 1789136018 | 4.12 VDC | 34.5 C | 1022.63 hPa | 0 | 0 |
| 1789135972 | 4.12 VDC | 34.5 C | 1022.63 hPa | 0 | 0 |
| 1789135884 | 4.12 VDC | 33.6 C | 1021.75 hPa | 0 | 0 |
| 1789135805 | 4.12 VDC | 33.1 C | 1019.25 hPa | 0 | 0 |
| 1789135675 | 4.13 VDC | 32.3 C | 1019 hPa | 0 | 0 |
| 1789135598 | 4.13 VDC | 31.7 C | 1021.63 hPa | 0 | 0 |
| 1789135496 | 4.13 VDC | 31.6 C | 1020.5 hPa | 0 | 0 |
| 1789135397 | 4.13 VDC | 31.4 C | 1020.88 hPa | 0 | 0 |
| 1789135351 | 4.13 VDC | 31.4 C | 1019.25 hPa | 0 | 0 |
| 1789132565 | 4.15 VDC | 32.9 C | 1023.75 hPa | 0 | 0 |
| 1789129856 | 4.16 VDC | 34 C | 1025.75 hPa | 0 | 0 |
| 1789127148 | 4.17 VDC | 33.8 C | 1023.13 hPa | 0 | 0 |
| 1789124439 | 4.21 VDC | 31.3 C | 1022.88 hPa | 0 | 0 |
| 1789121731 | 4.23 VDC | 30.2 C | 1023.38 hPa | 0 | 0 |
| 1789119023 | 4.26 VDC | 30.8 C | 1023.13 hPa | 0 | 0 |
| 1789116314 | 4.28 VDC | 32.7 C | 1023.38 hPa | 0 | 0 |
| 1789113605 | 4.31 VDC | 35 C | 1023.88 hPa | 0 | 0 |
| 1789110897 | 4.33 VDC | 36.2 C | 1023.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)