This is the latest recevied telemetry packets stored in our database for station/object YC0ASW-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Satellite* | Value5* |
|---|---|---|---|---|---|
| 1789183281 | 32 °C | 52 %RH | 1011 hPa | 26 Sat | 0 |
| 1789182504 | 31 °C | 53 %RH | 1011 hPa | 27 Sat | 0 |
| 1789181726 | 31 °C | 53 %RH | 1012 hPa | 26 Sat | 0 |
| 1789180950 | 31 °C | 53 %RH | 1012 hPa | 26 Sat | 0 |
| 1789180173 | 31 °C | 53 %RH | 1012 hPa | 27 Sat | 0 |
| 1789179396 | 31 °C | 53 %RH | 1012 hPa | 27 Sat | 0 |
| 1789178619 | 31 °C | 54 %RH | 1012 hPa | 26 Sat | 0 |
| 1789177842 | 31 °C | 53 %RH | 1012 hPa | 27 Sat | 0 |
| 1789177065 | 31 °C | 54 %RH | 1012 hPa | 26 Sat | 0 |
| 1789176287 | 31 °C | 54 %RH | 1012 hPa | 26 Sat | 0 |
| 1789175510 | 31 °C | 55 %RH | 1012 hPa | 28 Sat | 0 |
| 1789174733 | 31 °C | 55 %RH | 1012 hPa | 26 Sat | 0 |
| 1789173957 | 31 °C | 56 %RH | 1012 hPa | 25 Sat | 0 |
| 1789173180 | 31 °C | 56 %RH | 1011 hPa | 28 Sat | 0 |
| 1789172402 | 31 °C | 56 %RH | 1011 hPa | 26 Sat | 0 |
| 1789171625 | 30 °C | 57 %RH | 1011 hPa | 25 Sat | 0 |
| 1789170849 | 30 °C | 57 %RH | 1011 hPa | 27 Sat | 0 |
| 1789170071 | 30 °C | 57 %RH | 1011 hPa | 30 Sat | 0 |
| 1789169294 | 30 °C | 57 %RH | 1011 hPa | 28 Sat | 0 |
| 1789168517 | 30 °C | 58 %RH | 1010 hPa | 28 Sat | 0 |
| 1789167740 | 30 °C | 58 %RH | 1010 hPa | 28 Sat | 0 |
| 1789166963 | 31 °C | 58 %RH | 1010 hPa | 31 Sat | 0 |
| 1789166186 | 31 °C | 58 %RH | 1010 hPa | 26 Sat | 0 |
| 1789165409 | 31 °C | 58 %RH | 1010 hPa | 28 Sat | 0 |
| 1789164632 | 31 °C | 58 %RH | 1010 hPa | 29 Sat | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Satellite: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)