This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792844537 | 138 Count | 990 Count | 19 Count | 3.92 VDC | 0 VDC |
| 1792843962 | 137 Count | 983 Count | 19 Count | 4.03 VDC | 0 VDC |
| 1792843361 | 134 Count | 972 Count | 19 Count | 3.98 VDC | 0 VDC |
| 1792842760 | 133 Count | 963 Count | 19 Count | 3.97 VDC | 0 VDC |
| 1792842160 | 132 Count | 956 Count | 19 Count | 4.07 VDC | 0 VDC |
| 1792841559 | 131 Count | 948 Count | 19 Count | 4.03 VDC | 0 VDC |
| 1792840958 | 130 Count | 944 Count | 19 Count | 4.15 VDC | 0 VDC |
| 1792840357 | 114 Count | 915 Count | 8 Count | 4.16 VDC | 0 VDC |
| 1792839757 | 113 Count | 902 Count | 8 Count | 4.16 VDC | 0 VDC |
| 1792839156 | 112 Count | 894 Count | 8 Count | 4.14 VDC | 0 VDC |
| 1792838555 | 111 Count | 887 Count | 8 Count | 4.09 VDC | 0 VDC |
| 1792837955 | 110 Count | 878 Count | 8 Count | 4.09 VDC | 0 VDC |
| 1792837354 | 109 Count | 869 Count | 8 Count | 3.95 VDC | 0 VDC |
| 1792836753 | 108 Count | 865 Count | 8 Count | 3.95 VDC | 0 VDC |
| 1792836152 | 107 Count | 859 Count | 8 Count | 3.87 VDC | 0 VDC |
| 1792835552 | 106 Count | 849 Count | 8 Count | 3.92 VDC | 0 VDC |
| 1792834952 | 105 Count | 843 Count | 8 Count | 3.88 VDC | 0 VDC |
| 1792834350 | 104 Count | 837 Count | 8 Count | 3.89 VDC | 0 VDC |
| 1792833750 | 103 Count | 832 Count | 8 Count | 3.89 VDC | 0 VDC |
| 1792833149 | 102 Count | 825 Count | 8 Count | 3.8 VDC | 0 VDC |
| 1792832548 | 101 Count | 809 Count | 8 Count | 3.85 VDC | 0 VDC |
| 1792831948 | 100 Count | 803 Count | 8 Count | 3.84 VDC | 0 VDC |
| 1792831347 | 99 Count | 795 Count | 8 Count | 3.83 VDC | 0 VDC |
| 1792830746 | 98 Count | 791 Count | 8 Count | 3.85 VDC | 0 VDC |
| 1792830145 | 93 Count | 776 Count | 4 Count | 3.86 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)