This is the latest recevied telemetry packets stored in our database for station/object DL8GAK-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791304615 | 27.9 C | 39 % | 1020.88 hPa | 0 | 0 |
| 1791304578 | 27.8 C | 38.95 % | 1022.25 hPa | 0 | 0 |
| 1791304561 | 27.8 C | 38.95 % | 1021.88 hPa | 0 | 0 |
| 1791304544 | 27.8 C | 38.95 % | 1021.88 hPa | 0 | 0 |
| 1791304524 | 27.7 C | 39 % | 1019.75 hPa | 0 | 0 |
| 1791304507 | 27.7 C | 39 % | 1019.63 hPa | 0 | 0 |
| 1791304480 | 27.7 C | 39 % | 1020.5 hPa | 0 | 0 |
| 1791304463 | 27.6 C | 39.71 % | 1018.63 hPa | 0 | 0 |
| 1791304446 | 27.6 C | 39.71 % | 1019.5 hPa | 0 | 0 |
| 1791304390 | 27.3 C | 39.83 % | 1025.13 hPa | 0 | 0 |
| 1791304373 | 27.3 C | 39.83 % | 1023.5 hPa | 0 | 0 |
| 1791304356 | 27.3 C | 39.83 % | 1022.63 hPa | 0 | 0 |
| 1791304339 | 27.3 C | 39.83 % | 1021 hPa | 0 | 0 |
| 1791304305 | 27.1 C | 40.11 % | 1019.75 hPa | 0 | 0 |
| 1791304288 | 27.1 C | 40.11 % | 1020.38 hPa | 0 | 0 |
| 1791304271 | 26.8 C | 40.01 % | 1021.5 hPa | 0 | 0 |
| 1791304254 | 26.8 C | 40.01 % | 1023.13 hPa | 0 | 0 |
| 1791304237 | 26.8 C | 40.01 % | 1023.13 hPa | 0 | 0 |
| 1791304220 | 26.8 C | 40.01 % | 1021.5 hPa | 0 | 0 |
| 1791304200 | 26.6 C | 39.95 % | 1020.38 hPa | 0 | 0 |
| 1791304170 | 26.6 C | 39.95 % | 1021.38 hPa | 0 | 0 |
| 1791304153 | 26.4 C | 40.09 % | 1018.25 hPa | 0 | 0 |
| 1791304136 | 26.4 C | 40.09 % | 1019.88 hPa | 0 | 0 |
| 1791304104 | 26.4 C | 40.09 % | 1019.38 hPa | 0 | 0 |
| 1791304087 | 26.1 C | 40.46 % | 1024.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)