This is the latest recevied telemetry packets stored in our database for station/object DL8GAK-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787214330 | 31.3 C | 39.94 % | 1020.75 hPa | 0 | 0 |
| 1787214254 | 31.2 C | 39.96 % | 1020.38 hPa | 0 | 0 |
| 1787214189 | 31.2 C | 39.87 % | 1019.13 hPa | 0 | 0 |
| 1787213913 | 30.9 C | 40.65 % | 1018.5 hPa | 0 | 0 |
| 1787213889 | 30.9 C | 40.62 % | 1021.75 hPa | 0 | 0 |
| 1787213853 | 30.9 C | 40.62 % | 1020.25 hPa | 0 | 0 |
| 1787213662 | 30.7 C | 40.72 % | 1017.88 hPa | 0 | 0 |
| 1787213610 | 30.6 C | 40.84 % | 1017.63 hPa | 0 | 0 |
| 1787213584 | 30.6 C | 40.93 % | 1017 hPa | 0 | 0 |
| 1787212985 | 30 C | 42.01 % | 1019 hPa | 0 | 0 |
| 1787212961 | 29.9 C | 42.16 % | 1019.38 hPa | 0 | 0 |
| 1787212937 | 29.9 C | 42.16 % | 1018.63 hPa | 0 | 0 |
| 1787212913 | 29.8 C | 42.08 % | 1019.13 hPa | 0 | 0 |
| 1787212644 | 29.5 C | 42.58 % | 1020.63 hPa | 0 | 0 |
| 1787212596 | 29.4 C | 42.82 % | 1016.63 hPa | 0 | 0 |
| 1787212532 | 29.4 C | 42.88 % | 1018.5 hPa | 0 | 0 |
| 1787212468 | 29.3 C | 42.87 % | 1018.25 hPa | 0 | 0 |
| 1787212348 | 29.2 C | 43.67 % | 1016.25 hPa | 0 | 0 |
| 1787212282 | 29.1 C | 43.18 % | 1016.5 hPa | 0 | 0 |
| 1787210592 | 26.3 C | 47.64 % | 1017.75 hPa | 0 | 0 |
| 1787210567 | 26.3 C | 47.64 % | 1017.13 hPa | 0 | 0 |
| 1787210427 | 26 C | 48.54 % | 1017.38 hPa | 0 | 0 |
| 1787210403 | 25.8 C | 48.6 % | 1016.88 hPa | 0 | 0 |
| 1787210356 | 25.8 C | 48.6 % | 1016.25 hPa | 0 | 0 |
| 1787210331 | 25.7 C | 49.04 % | 1015.38 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)