This is the latest recevied telemetry packets stored in our database for station/object HB9IQZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787782887 | 0 Count | 996 Count | 0 Count | 0 VDC | 0 VDC |
| 1787781086 | 0 Count | 971 Count | 0 Count | 0 VDC | 0 VDC |
| 1787779286 | 0 Count | 946 Count | 0 Count | 0 VDC | 0 VDC |
| 1787777486 | 0 Count | 922 Count | 0 Count | 0 VDC | 0 VDC |
| 1787775686 | 0 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1787773886 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1787772086 | 0 Count | 865 Count | 0 Count | 0 VDC | 0 VDC |
| 1787770287 | 0 Count | 841 Count | 0 Count | 0 VDC | 0 VDC |
| 1787768487 | 0 Count | 815 Count | 0 Count | 0 VDC | 0 VDC |
| 1787766687 | 0 Count | 795 Count | 0 Count | 0 VDC | 0 VDC |
| 1787764887 | 0 Count | 775 Count | 0 Count | 0 VDC | 0 VDC |
| 1787763087 | 0 Count | 754 Count | 0 Count | 0 VDC | 0 VDC |
| 1787761287 | 0 Count | 715 Count | 0 Count | 0 VDC | 0 VDC |
| 1787759487 | 0 Count | 678 Count | 0 Count | 0 VDC | 0 VDC |
| 1787757687 | 0 Count | 653 Count | 0 Count | 0 VDC | 0 VDC |
| 1787755887 | 0 Count | 629 Count | 0 Count | 0 VDC | 0 VDC |
| 1787754087 | 0 Count | 612 Count | 0 Count | 0 VDC | 0 VDC |
| 1787752287 | 0 Count | 596 Count | 0 Count | 0 VDC | 0 VDC |
| 1787750487 | 0 Count | 571 Count | 0 Count | 0 VDC | 0 VDC |
| 1787748687 | 0 Count | 549 Count | 0 Count | 0 VDC | 0 VDC |
| 1787746887 | 0 Count | 523 Count | 0 Count | 0 VDC | 0 VDC |
| 1787745087 | 0 Count | 507 Count | 0 Count | 0 VDC | 0 VDC |
| 1787743286 | 0 Count | 489 Count | 0 Count | 0 VDC | 0 VDC |
| 1787741486 | 0 Count | 466 Count | 0 Count | 0 VDC | 0 VDC |
| 1787739686 | 0 Count | 441 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)