This is the latest recevied telemetry packets stored in our database for station/object SQ9LCJ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790694111 | 707 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790692310 | 705 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790690509 | 704 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790688709 | 703 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790686908 | 701 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790685107 | 700 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790683306 | 698 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790681506 | 697 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790679705 | 695 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790677904 | 694 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790676103 | 693 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790674311 | 691 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790672510 | 690 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790670709 | 688 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790668909 | 687 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790667108 | 685 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790665307 | 684 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790663506 | 683 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790661706 | 681 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790659905 | 680 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790658104 | 678 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790656303 | 677 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790654504 | 675 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790652711 | 674 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1790650910 | 673 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)