This is the latest recevied telemetry packets stored in our database for station/object SP7TPC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789230333 | 25 Count | 32 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789228532 | 24 Count | 30 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789226731 | 21 Count | 28 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789224930 | 20 Count | 26 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789223129 | 17 Count | 18 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789221328 | 16 Count | 17 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789176336 | 610 Count | 985 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789174535 | 609 Count | 983 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789172734 | 608 Count | 981 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789169133 | 606 Count | 977 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789167332 | 605 Count | 975 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789165530 | 604 Count | 973 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789163729 | 603 Count | 971 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789161929 | 602 Count | 969 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789160128 | 599 Count | 967 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789158327 | 598 Count | 965 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789156526 | 576 Count | 963 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789154735 | 575 Count | 961 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789152934 | 574 Count | 959 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789151133 | 571 Count | 957 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789149332 | 563 Count | 955 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789147531 | 557 Count | 945 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789145731 | 556 Count | 943 Count | 0 Count | 4.18 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)