This is the latest recevied telemetry packets stored in our database for station/object SP7TPC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793181864 | 236 Count | 591 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1793180063 | 235 Count | 589 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793178262 | 233 Count | 588 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1793176461 | 232 Count | 586 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793174660 | 230 Count | 584 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1793172859 | 229 Count | 582 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793171059 | 227 Count | 580 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1793169258 | 226 Count | 576 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1793167457 | 224 Count | 565 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793165655 | 223 Count | 561 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1793163864 | 221 Count | 557 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793162063 | 220 Count | 553 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793160262 | 218 Count | 549 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793158461 | 217 Count | 545 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793156660 | 215 Count | 541 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1793154859 | 214 Count | 537 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1793153058 | 212 Count | 533 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793151258 | 211 Count | 530 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793149457 | 209 Count | 526 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793147656 | 208 Count | 522 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793145855 | 206 Count | 518 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793144055 | 205 Count | 515 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1793142263 | 203 Count | 511 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1793140462 | 202 Count | 508 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1793136861 | 199 Count | 500 Count | 0 Count | 4.17 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)