This is the latest recevied telemetry packets stored in our database for station/object YD1BPG-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1793192382 | 32 °C | 47 %RH | 923 hPa | 0 | 0 |
| 1793190407 | 32 °C | 47 %RH | 922 hPa | 0 | 0 |
| 1793190393 | 32 °C | 47 %RH | 922 hPa | 0 | 0 |
| 1793189271 | 32 °C | 47 %RH | 922 hPa | 0 | 0 |
| 1793187295 | 32 °C | 46 %RH | 922 hPa | 0 | 0 |
| 1793185320 | 32 °C | 46 %RH | 922 hPa | 0 | 0 |
| 1793183354 | 32 °C | 47 %RH | 921 hPa | 0 | 0 |
| 1793181373 | 32 °C | 48 %RH | 921 hPa | 0 | 0 |
| 1793179395 | 32 °C | 47 %RH | 920 hPa | 0 | 0 |
| 1793177420 | 32 °C | 47 %RH | 920 hPa | 0 | 0 |
| 1793175445 | 32 °C | 44 %RH | 920 hPa | 0 | 0 |
| 1793173470 | 32 °C | 44 %RH | 919 hPa | 0 | 0 |
| 1793171495 | 32 °C | 45 %RH | 920 hPa | 0 | 0 |
| 1793169520 | 32 °C | 45 %RH | 920 hPa | 0 | 0 |
| 1793167545 | 32 °C | 48 %RH | 921 hPa | 0 | 0 |
| 1793165570 | 32 °C | 45 %RH | 921 hPa | 0 | 0 |
| 1793163595 | 32 °C | 46 %RH | 921 hPa | 0 | 0 |
| 1793161620 | 31 °C | 46 %RH | 922 hPa | 0 | 0 |
| 1793159645 | 31 °C | 46 %RH | 922 hPa | 0 | 0 |
| 1793157670 | 31 °C | 49 %RH | 922 hPa | 0 | 0 |
| 1793155695 | 31 °C | 48 %RH | 922 hPa | 0 | 0 |
| 1793153720 | 30 °C | 49 %RH | 922 hPa | 0 | 0 |
| 1793151745 | 30 °C | 50 %RH | 922 hPa | 0 | 0 |
| 1793149770 | 30 °C | 50 %RH | 922 hPa | 0 | 0 |
| 1793147795 | 30 °C | 49 %RH | 922 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)