This is the latest recevied telemetry packets stored in our database for station/object SA7NOA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789244386 | 54 Count | 167 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1789243483 | 53 Count | 165 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1789242579 | 52 Count | 161 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1789241758 | 47 Count | 158 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1789240854 | 46 Count | 155 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1789239951 | 45 Count | 151 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1789239047 | 44 Count | 147 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1789238143 | 43 Count | 142 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1789237240 | 42 Count | 138 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1789236336 | 41 Count | 133 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789235433 | 40 Count | 129 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789234529 | 39 Count | 125 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1789233626 | 38 Count | 122 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1789232722 | 37 Count | 118 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1789231819 | 36 Count | 114 Count | 0 Count | 4.14 VDC | 0 VDC |
| 1789230915 | 35 Count | 110 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1789230012 | 34 Count | 106 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1789229108 | 33 Count | 102 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1789228205 | 32 Count | 98 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1789226397 | 30 Count | 93 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1789225494 | 29 Count | 91 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1789224590 | 28 Count | 88 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1789223687 | 27 Count | 85 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1789222783 | 26 Count | 82 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789221880 | 25 Count | 78 Count | 0 Count | 4.27 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)