This is the latest recevied telemetry packets stored in our database for station/object SA7NOA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785081375 | 111 Count | 396 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1785080472 | 110 Count | 391 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1785079568 | 109 Count | 386 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1785078665 | 108 Count | 382 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1785077761 | 107 Count | 378 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1785075954 | 105 Count | 373 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1785075050 | 104 Count | 370 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1785074147 | 103 Count | 369 Count | 0 Count | 4.14 VDC | 0 VDC |
| 1785073243 | 102 Count | 367 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1785072422 | 97 Count | 366 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1785071518 | 96 Count | 364 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1785070615 | 95 Count | 361 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1785069711 | 94 Count | 358 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1785068808 | 93 Count | 355 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1785067904 | 92 Count | 352 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1785067001 | 91 Count | 348 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1785066097 | 90 Count | 344 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1785065194 | 89 Count | 339 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1785064290 | 88 Count | 334 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1785063387 | 87 Count | 330 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1785062483 | 86 Count | 327 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1785061579 | 85 Count | 323 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1785060676 | 84 Count | 319 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1785059772 | 83 Count | 316 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1785058869 | 82 Count | 312 Count | 0 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)