This is the latest recevied telemetry packets stored in our database for station/object IR2UAZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791928929 | 12.5 Volt | 0 | 0 | 0 | 0 |
| 1791927728 | 12.5 Volt | 0 | 0 | 0 | 0 |
| 1791926528 | 12.5 Volt | 0 | 0 | 0 | 0 |
| 1791925327 | 12.5 Volt | 0 | 0 | 0 | 0 |
| 1791924127 | 12.5 Volt | 0 | 0 | 0 | 0 |
| 1791922927 | 12.5 Volt | 0 | 0 | 0 | 0 |
| 1791921726 | 12.5 Volt | 0 | 0 | 0 | 0 |
| 1791920526 | 12.6 Volt | 0 | 0 | 0 | 0 |
| 1791919325 | 12.5 Volt | 0 | 0 | 0 | 0 |
| 1791918125 | 12.6 Volt | 0 | 0 | 0 | 0 |
| 1791916925 | 12.6 Volt | 0 | 0 | 0 | 0 |
| 1791915725 | 12.4 Volt | 0 | 0 | 0 | 0 |
| 1791914524 | 12.6 Volt | 0 | 0 | 0 | 0 |
| 1791913324 | 12.6 Volt | 0 | 0 | 0 | 0 |
| 1791912124 | 12.6 Volt | 0 | 0 | 0 | 0 |
| 1791910923 | 12.6 Volt | 0 | 0 | 0 | 0 |
| 1791909723 | 12.7 Volt | 0 | 0 | 0 | 0 |
| 1791908523 | 13.4 Volt | 0 | 0 | 0 | 0 |
| 1791907322 | 13.8 Volt | 0 | 0 | 0 | 0 |
| 1791906122 | 13.9 Volt | 0 | 0 | 0 | 0 |
| 1791904922 | 13.9 Volt | 0 | 0 | 0 | 0 |
| 1791903721 | 13.8 Volt | 0 | 0 | 0 | 0 |
| 1791902521 | 13.9 Volt | 0 | 0 | 0 | 0 |
| 1791901321 | 13.8 Volt | 0 | 0 | 0 | 0 |
| 1791900120 | 13.7 Volt | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Batt: 0, 0.1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)