This is the latest recevied telemetry packets stored in our database for station/object IR5AO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783368203 | 12.4 VDC | 0 | 0 | 0 | 0 |
| 1783366403 | 12.94 VDC | 0 | 0 | 0 | 0 |
| 1783364603 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1783362803 | 13.14 VDC | 0 | 0 | 0 | 0 |
| 1783361002 | 13.16 VDC | 0 | 0 | 0 | 0 |
| 1783359203 | 13.1 VDC | 0 | 0 | 0 | 0 |
| 1783357401 | 13.2 VDC | 0 | 0 | 0 | 0 |
| 1783355602 | 14.02 VDC | 0 | 0 | 0 | 0 |
| 1783353802 | 13.8 VDC | 0 | 0 | 0 | 0 |
| 1783352002 | 14.22 VDC | 0 | 0 | 0 | 0 |
| 1783350202 | 14.46 VDC | 0 | 0 | 0 | 0 |
| 1783348401 | 14.68 VDC | 0 | 0 | 0 | 0 |
| 1783346601 | 14.9 VDC | 0 | 0 | 0 | 0 |
| 1783344801 | 14.92 VDC | 0 | 0 | 0 | 0 |
| 1783343001 | 14.86 VDC | 0 | 0 | 0 | 0 |
| 1783341201 | 14.86 VDC | 0 | 0 | 0 | 0 |
| 1783339401 | 14.88 VDC | 0 | 0 | 0 | 0 |
| 1783337600 | 14.92 VDC | 0 | 0 | 0 | 0 |
| 1783335799 | 14.86 VDC | 0 | 0 | 0 | 0 |
| 1783334005 | 14.72 VDC | 0 | 0 | 0 | 0 |
| 1783332204 | 14.88 VDC | 0 | 0 | 0 | 0 |
| 1783330404 | 14.78 VDC | 0 | 0 | 0 | 0 |
| 1783328603 | 15.04 VDC | 0 | 0 | 0 | 0 |
| 1783326803 | 15.04 VDC | 0 | 0 | 0 | 0 |
| 1783325003 | 15.04 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)