This is the latest recevied telemetry packets stored in our database for station/object SP7KGO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782615235 | 402 Count | 1052 Count | 315 Count | 3.91 VDC | 0.08 VDC |
| 1782613434 | 380 Count | 1000 Count | 295 Count | 3.86 VDC | 0.08 VDC |
| 1782611632 | 368 Count | 967 Count | 285 Count | 3.89 VDC | 0.08 VDC |
| 1782609849 | 362 Count | 950 Count | 282 Count | 3.89 VDC | 0.08 VDC |
| 1782608048 | 348 Count | 905 Count | 269 Count | 3.87 VDC | 0.08 VDC |
| 1782606246 | 334 Count | 871 Count | 257 Count | 3.87 VDC | 0.08 VDC |
| 1782604445 | 319 Count | 835 Count | 244 Count | 3.9 VDC | 0.08 VDC |
| 1782602642 | 308 Count | 805 Count | 235 Count | 3.91 VDC | 0.08 VDC |
| 1782600841 | 296 Count | 777 Count | 225 Count | 3.87 VDC | 0.08 VDC |
| 1782599040 | 283 Count | 744 Count | 214 Count | 3.86 VDC | 0.08 VDC |
| 1782597238 | 272 Count | 713 Count | 205 Count | 3.86 VDC | 0.08 VDC |
| 1782595437 | 253 Count | 676 Count | 187 Count | 3.86 VDC | 0.08 VDC |
| 1782593635 | 234 Count | 631 Count | 170 Count | 3.87 VDC | 0.08 VDC |
| 1782591833 | 226 Count | 612 Count | 164 Count | 3.87 VDC | 0.08 VDC |
| 1782590032 | 216 Count | 589 Count | 156 Count | 3.9 VDC | 0.08 VDC |
| 1782588249 | 210 Count | 570 Count | 152 Count | 3.89 VDC | 0.08 VDC |
| 1782586447 | 202 Count | 546 Count | 146 Count | 3.91 VDC | 0.08 VDC |
| 1782584646 | 195 Count | 531 Count | 141 Count | 3.9 VDC | 0.08 VDC |
| 1782582844 | 184 Count | 508 Count | 131 Count | 3.87 VDC | 0.08 VDC |
| 1782581043 | 175 Count | 485 Count | 126 Count | 3.9 VDC | 0.08 VDC |
| 1782579241 | 167 Count | 464 Count | 119 Count | 3.85 VDC | 0.08 VDC |
| 1782577440 | 161 Count | 451 Count | 115 Count | 3.9 VDC | 0.08 VDC |
| 1782575639 | 153 Count | 430 Count | 109 Count | 3.9 VDC | 0.08 VDC |
| 1782573837 | 148 Count | 422 Count | 106 Count | 3.88 VDC | 0.08 VDC |
| 1782572035 | 140 Count | 405 Count | 100 Count | 3.91 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)