This is the latest recevied telemetry packets stored in our database for station/object HS8AC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | VBAT* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789181082 | 26.65 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789180482 | 27.53 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789179881 | 27.27 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789179281 | 27.04 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789178682 | 26.68 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789178081 | 26.29 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789177481 | 25.94 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789176882 | 25.95 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789176282 | 25.63 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789175682 | 25.83 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789175082 | 25.9 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789174481 | 26.03 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789173881 | 25.88 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789173281 | 26.26 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789172681 | 26.74 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789172081 | 26.64 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789171481 | 26.5 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789170881 | 26.55 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789170281 | 26.42 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789169681 | 26.59 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789169081 | 26.5 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789168481 | 26.59 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789167881 | 26.68 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789167281 | 26.57 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1789166681 | 26.72 °C | 100 %RH | 4.2 V | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
VBAT: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)