This is the latest recevied telemetry packets stored in our database for station/object EA9ABY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789222708 | 753 Count | 280 Count | 92 Count | 3.7 VDC | 0 VDC |
| 1789219105 | 751 Count | 279 Count | 91 Count | 3.68 VDC | 0 VDC |
| 1789215501 | 750 Count | 279 Count | 91 Count | 3.64 VDC | 0 VDC |
| 1789211897 | 749 Count | 279 Count | 91 Count | 3.62 VDC | 0 VDC |
| 1789208293 | 748 Count | 279 Count | 91 Count | 3.54 VDC | 0 VDC |
| 1789204688 | 747 Count | 279 Count | 91 Count | 3.5 VDC | 0 VDC |
| 1789201084 | 746 Count | 279 Count | 91 Count | 3.49 VDC | 0 VDC |
| 1789197481 | 745 Count | 279 Count | 91 Count | 3.48 VDC | 0 VDC |
| 1789193877 | 744 Count | 279 Count | 91 Count | 3.49 VDC | 0 VDC |
| 1789190273 | 743 Count | 279 Count | 91 Count | 3.48 VDC | 0 VDC |
| 1789186668 | 741 Count | 278 Count | 90 Count | 3.49 VDC | 0 VDC |
| 1789183064 | 740 Count | 278 Count | 90 Count | 3.51 VDC | 0 VDC |
| 1789179461 | 739 Count | 278 Count | 90 Count | 3.51 VDC | 0 VDC |
| 1789175857 | 737 Count | 277 Count | 89 Count | 3.54 VDC | 0 VDC |
| 1789172253 | 736 Count | 277 Count | 89 Count | 3.53 VDC | 0 VDC |
| 1789168649 | 735 Count | 277 Count | 89 Count | 3.55 VDC | 0 VDC |
| 1789165045 | 734 Count | 277 Count | 89 Count | 3.59 VDC | 0 VDC |
| 1789161441 | 732 Count | 276 Count | 88 Count | 3.59 VDC | 0 VDC |
| 1789157838 | 731 Count | 276 Count | 88 Count | 3.61 VDC | 0 VDC |
| 1789154234 | 730 Count | 276 Count | 88 Count | 3.63 VDC | 0 VDC |
| 1789150720 | 729 Count | 276 Count | 88 Count | 3.65 VDC | 0 VDC |
| 1789147116 | 728 Count | 276 Count | 88 Count | 3.68 VDC | 0 VDC |
| 1789143512 | 727 Count | 276 Count | 88 Count | 3.73 VDC | 0 VDC |
| 1789139908 | 726 Count | 276 Count | 88 Count | 3.7 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)