This is the latest recevied telemetry packets stored in our database for station/object 9W8NIC-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783162155 | 4.17 VDC | 2.44 VDC | 0 | 0 | 0 |
| 1783161254 | 4.18 VDC | 3.86 VDC | 0 | 0 | 0 |
| 1783160354 | 4.18 VDC | 3.9 VDC | 0 | 0 | 0 |
| 1783158553 | 4.21 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1783157653 | 4.21 VDC | 4.04 VDC | 0 | 0 | 0 |
| 1783156752 | 4.26 VDC | 4.1 VDC | 0 | 0 | 0 |
| 1783155852 | 4.28 VDC | 6.14 VDC | 0 | 0 | 0 |
| 1783154951 | 4.28 VDC | 5.94 VDC | 0 | 0 | 0 |
| 1783154051 | 4.28 VDC | 6.04 VDC | 0 | 0 | 0 |
| 1783153151 | 4.28 VDC | 6.3 VDC | 0 | 0 | 0 |
| 1783152250 | 4.28 VDC | 6.96 VDC | 0 | 0 | 0 |
| 1783151350 | 4.28 VDC | 7.18 VDC | 0 | 0 | 0 |
| 1783150450 | 4.28 VDC | 6.88 VDC | 0 | 0 | 0 |
| 1783149550 | 4.28 VDC | 6.88 VDC | 0 | 0 | 0 |
| 1783148649 | 4.28 VDC | 6.5 VDC | 0 | 0 | 0 |
| 1783147749 | 4.28 VDC | 6.84 VDC | 0 | 0 | 0 |
| 1783146849 | 4.28 VDC | 6.44 VDC | 0 | 0 | 0 |
| 1783145949 | 4.28 VDC | 6.64 VDC | 0 | 0 | 0 |
| 1783145048 | 4.28 VDC | 6.74 VDC | 0 | 0 | 0 |
| 1783144148 | 4.28 VDC | 6.7 VDC | 0 | 0 | 0 |
| 1783143248 | 4.28 VDC | 6.62 VDC | 0 | 0 | 0 |
| 1783142347 | 4.28 VDC | 6.64 VDC | 0 | 0 | 0 |
| 1783141447 | 4.28 VDC | 6.72 VDC | 0 | 0 | 0 |
| 1783140547 | 4.28 VDC | 6.72 VDC | 0 | 0 | 0 |
| 1783139646 | 4.28 VDC | 6.78 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)