EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

HS8AS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS8AS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	VBAT *	CPU*
1789181120	28.59 °C	83 %RH	4.11 V	41.29 °C
1789180520	28.1 °C	86.4 %RH	4.08 V	40.29 °C
1789179920	28.21 °C	84.9 %RH	4.1 V	41.29 °C
1789179320	27.83 °C	86.1 %RH	4.08 V	39.29 °C
1789178721	27.88 °C	85.1 %RH	4.07 V	40.29 °C
1789178120	27.25 °C	88.4 %RH	4.06 V	38.29 °C
1789177520	27.62 °C	86.3 %RH	4.03 V	38.29 °C
1789176920	27.37 °C	88 %RH	4.02 V	37.29 °C
1789176320	26.53 °C	90.7 %RH	4.02 V	37.29 °C
1789175720	27.28 °C	86.7 %RH	4 V	39.29 °C
1789175120	27.71 °C	86.7 %RH	4.04 V	38.29 °C
1789174520	26.69 °C	88.3 %RH	3.99 V	36.29 °C
1789173920	26.09 °C	91.5 %RH	3.97 V	35.29 °C
1789173320	25.92 °C	90.7 %RH	3.95 V	34.29 °C
1789172720	25.07 °C	94.8 %RH	3.94 V	32.29 °C
1789172120	25.12 °C	94.8 %RH	3.93 V	32.29 °C
1789171520	24.94 °C	95.4 %RH	3.93 V	31.29 °C
1789170920	24.86 °C	95.6 %RH	3.92 V	31.29 °C
1789170320	24.92 °C	95.3 %RH	3.93 V	31.29 °C
1789169720	24.89 °C	94.2 %RH	3.91 V	31.29 °C
1789169120	25.26 °C	92.2 %RH	3.92 V	31.29 °C
1789168520	25.16 °C	92.8 %RH	3.92 V	31.29 °C
1789167920	25.03 °C	93.8 %RH	3.91 V	30.29 °C
1789167320	24.76 °C	95.7 %RH	3.92 V	30.29 °C
1789166720	24.32 °C	97.7 %RH	3.92 V	30.29 °C

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

VBAT : 0, 0.01, 0

CPU: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)