This is the latest recevied telemetry packets stored in our database for station/object 9M8VAT-C. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783157361 | 4.01 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783156458 | 4.01 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783155557 | 4 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783154655 | 4.04 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783153754 | 4.02 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783152853 | 4.02 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783151951 | 4.03 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783151050 | 4.03 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783150148 | 4.04 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783149247 | 4.02 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783148345 | 4.04 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783147444 | 4.04 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783146542 | 4.04 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783145641 | 4.03 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783144739 | 4.05 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783143837 | 4.01 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783142936 | 4.02 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783142034 | 4.02 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783141133 | 4.01 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783140231 | 4.05 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783139330 | 4.05 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783138428 | 4.02 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783137527 | 4.02 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783136625 | 4.01 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1783135724 | 4.03 VDC | 0.54 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)