This is the latest recevied telemetry packets stored in our database for station/object HB9GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1741955937 | 4.21 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1741955033 | 4.23 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741954130 | 4.22 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1741952326 | 4.21 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1741951424 | 4.19 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1741950521 | 4.24 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741949617 | 4.25 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741948714 | 4.24 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741947810 | 4.29 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1741946906 | 4.27 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1741946002 | 4.19 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1741945098 | 4.29 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1741944195 | 4.21 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1741943291 | 4.2 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1741942387 | 4.28 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741941483 | 4.23 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741940581 | 4.28 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741939677 | 4.21 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741938773 | 4.23 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741937870 | 4.25 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741936966 | 4.23 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1741936062 | 4.25 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1741935158 | 4.19 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1741934255 | 4.22 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1741933352 | 4.19 VDC | 0.7 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)