This is the latest recevied telemetry packets stored in our database for station/object SV2TCA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789200262 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1789199362 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1789197562 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789196662 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789195762 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789193964 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789193062 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789192162 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789191262 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789190362 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789189463 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789188562 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789187667 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789186767 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789185867 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789182262 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1789181361 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1789180461 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1789179568 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1789178661 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1789177761 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1789175961 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1789175061 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1789174161 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1789172361 | 4.18 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)