This is the latest recevied telemetry packets stored in our database for station/object SA7BRK-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789210660 | 3 VDC | 0 | 0 | 0 | 0 |
| 1789209757 | 3.14 VDC | 0 | 0 | 0 | 0 |
| 1789208853 | 3.23 VDC | 0 | 0 | 0 | 0 |
| 1789207951 | 3.3 VDC | 0 | 0 | 0 | 0 |
| 1789207048 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789206145 | 3.39 VDC | 0 | 0 | 0 | 0 |
| 1789205241 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1789204339 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789204311 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789204296 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789204281 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789204266 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789204231 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789204215 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789204200 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789204168 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789204095 | 3.57 VDC | 0 | 0 | 0 | 0 |
| 1789204065 | 3.57 VDC | 0 | 0 | 0 | 0 |
| 1789204044 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1789204006 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1789203924 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1789198652 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1789198636 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1789198581 | 3.6 VDC | 0 | 0 | 0 | 0 |
| 1789198539 | 3.6 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)