EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

HS2AC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS2AC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1780556314	34.18 °C	61.6 %RH	800 hPa	3.94 V
1780555281	33.69 °C	62.9 %RH	800 hPa	3.92 V
1780554247	35.43 °C	57.7 %RH	800 hPa	3.91 V
1780553213	35.52 °C	56 %RH	800 hPa	3.92 V
1780552181	36.32 °C	54.3 %RH	800 hPa	3.89 V
1780551147	33.82 °C	60.4 %RH	800 hPa	3.88 V
1780550114	33.81 °C	61.6 %RH	800 hPa	3.86 V
1780549081	35.13 °C	57.6 %RH	800 hPa	3.85 V
1780548048	35.15 °C	57.9 %RH	800 hPa	3.86 V
1780547009	35.06 °C	57.9 %RH	800 hPa	3.84 V
1780546999	34.96 °C	58.6 %RH	800 hPa	3.84 V
1780546965	34.64 °C	59.5 %RH	800 hPa	3.84 V
1780545932	35.07 °C	56.9 %RH	800 hPa	3.83 V
1780544898	34.08 °C	60.1 %RH	800 hPa	3.8 V
1780543863	33.81 °C	60.9 %RH	800 hPa	3.78 V
1780542830	30.97 °C	74.3 %RH	800 hPa	3.74 V
1780541796	29.55 °C	82.4 %RH	800 hPa	3.74 V
1780540764	31.5 °C	71.4 %RH	800 hPa	3.74 V
1780539731	31.37 °C	69.6 %RH	800 hPa	3.74 V
1780538698	31.94 °C	68 %RH	800 hPa	3.74 V
1780537663	31.37 °C	70 %RH	800 hPa	3.74 V
1780536630	31.17 °C	71.1 %RH	800 hPa	3.73 V
1780535597	30.78 °C	72.3 %RH	800 hPa	3.72 V
1780534563	30.91 °C	72 %RH	800 hPa	3.71 V
1780533530	30.3 °C	74.5 %RH	800 hPa	3.71 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)