This is the latest recevied telemetry packets stored in our database for station/object 9W8NIC-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789270625 | 4 VDC | 4.36 VDC | 0 | 0 | 0 |
| 1789269724 | 3.98 VDC | 4.28 VDC | 0 | 0 | 0 |
| 1789268824 | 3.96 VDC | 4.3 VDC | 0 | 0 | 0 |
| 1789267924 | 3.94 VDC | 4.3 VDC | 0 | 0 | 0 |
| 1789267023 | 3.92 VDC | 4.3 VDC | 0 | 0 | 0 |
| 1789266123 | 3.88 VDC | 4.12 VDC | 0 | 0 | 0 |
| 1789265223 | 3.89 VDC | 4.24 VDC | 0 | 0 | 0 |
| 1789264323 | 3.87 VDC | 4.14 VDC | 0 | 0 | 0 |
| 1789263422 | 3.85 VDC | 4.08 VDC | 0 | 0 | 0 |
| 1789262522 | 3.84 VDC | 4.08 VDC | 0 | 0 | 0 |
| 1789261622 | 3.83 VDC | 4.08 VDC | 0 | 0 | 0 |
| 1789260721 | 3.83 VDC | 4.06 VDC | 0 | 0 | 0 |
| 1789259821 | 3.82 VDC | 4.06 VDC | 0 | 0 | 0 |
| 1789258921 | 3.82 VDC | 4.06 VDC | 0 | 0 | 0 |
| 1789258020 | 3.81 VDC | 4.06 VDC | 0 | 0 | 0 |
| 1789257120 | 3.82 VDC | 3.64 VDC | 0 | 0 | 0 |
| 1789256220 | 3.81 VDC | 3.6 VDC | 0 | 0 | 0 |
| 1789255319 | 3.81 VDC | 3.6 VDC | 0 | 0 | 0 |
| 1789254419 | 3.81 VDC | 3.6 VDC | 0 | 0 | 0 |
| 1789253521 | 3.81 VDC | 3.58 VDC | 0 | 0 | 0 |
| 1789252619 | 3.82 VDC | 3.54 VDC | 0 | 0 | 0 |
| 1789251718 | 3.82 VDC | 3.52 VDC | 0 | 0 | 0 |
| 1789250818 | 3.83 VDC | 2.34 VDC | 0 | 0 | 0 |
| 1789249918 | 3.84 VDC | 2.28 VDC | 0 | 0 | 0 |
| 1789249017 | 3.84 VDC | 2.28 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)