This is the latest recevied telemetry packets stored in our database for station/object YC2YIZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793189409 | 0 Count | 975 Count | 0 Count | 0 VDC | 0 VDC |
| 1793187609 | 0 Count | 948 Count | 0 Count | 0 VDC | 0 VDC |
| 1793185809 | 0 Count | 921 Count | 0 Count | 0 VDC | 0 VDC |
| 1793184009 | 0 Count | 898 Count | 0 Count | 0 VDC | 0 VDC |
| 1793182209 | 0 Count | 870 Count | 0 Count | 0 VDC | 0 VDC |
| 1793180409 | 0 Count | 847 Count | 0 Count | 0 VDC | 0 VDC |
| 1793178609 | 0 Count | 824 Count | 0 Count | 0 VDC | 0 VDC |
| 1793176809 | 0 Count | 808 Count | 0 Count | 0 VDC | 0 VDC |
| 1793175009 | 0 Count | 791 Count | 0 Count | 0 VDC | 0 VDC |
| 1793173209 | 0 Count | 772 Count | 0 Count | 0 VDC | 0 VDC |
| 1793171409 | 0 Count | 754 Count | 0 Count | 0 VDC | 0 VDC |
| 1793169609 | 0 Count | 738 Count | 0 Count | 0 VDC | 0 VDC |
| 1793167808 | 0 Count | 722 Count | 0 Count | 0 VDC | 0 VDC |
| 1793166008 | 0 Count | 706 Count | 0 Count | 0 VDC | 0 VDC |
| 1793164208 | 0 Count | 688 Count | 0 Count | 0 VDC | 0 VDC |
| 1793162408 | 0 Count | 667 Count | 0 Count | 0 VDC | 0 VDC |
| 1793160608 | 0 Count | 643 Count | 0 Count | 0 VDC | 0 VDC |
| 1793158808 | 0 Count | 615 Count | 0 Count | 0 VDC | 0 VDC |
| 1793157008 | 0 Count | 589 Count | 0 Count | 0 VDC | 0 VDC |
| 1793155208 | 0 Count | 563 Count | 0 Count | 0 VDC | 0 VDC |
| 1793153408 | 0 Count | 543 Count | 0 Count | 0 VDC | 0 VDC |
| 1793151608 | 0 Count | 525 Count | 0 Count | 0 VDC | 0 VDC |
| 1793149808 | 0 Count | 503 Count | 0 Count | 0 VDC | 0 VDC |
| 1793148008 | 0 Count | 476 Count | 0 Count | 0 VDC | 0 VDC |
| 1793146208 | 0 Count | 455 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)