This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBAT* | IBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783383207 | 13.28 V | -36 mA | 0 | 0 | 0 |
| 1783381281 | 13.25 V | 12 mA | 0 | 0 | 0 |
| 1783378732 | 13.24 V | 50 mA | 0 | 0 | 0 |
| 1783376919 | 13.24 V | 52 mA | 0 | 0 | 0 |
| 1783375119 | 13.24 V | 48 mA | 0 | 0 | 0 |
| 1783373319 | 13.24 V | 57 mA | 0 | 0 | 0 |
| 1783372879 | 13.24 V | 45 mA | 0 | 0 | 0 |
| 1783372061 | 13.24 V | 54 mA | 0 | 0 | 0 |
| 1783370261 | 13.24 V | 52 mA | 0 | 0 | 0 |
| 1783368461 | 13.25 V | 49 mA | 0 | 0 | 0 |
| 1783366664 | 13.25 V | 50 mA | 0 | 0 | 0 |
| 1783364861 | 13.25 V | 47 mA | 0 | 0 | 0 |
| 1783363063 | 13.25 V | 49 mA | 0 | 0 | 0 |
| 1783361261 | 13.25 V | 48 mA | 0 | 0 | 0 |
| 1783359463 | 13.25 V | 55 mA | 0 | 0 | 0 |
| 1783358990 | 13.26 V | 44 mA | 0 | 0 | 0 |
| 1783355872 | 13.26 V | 46 mA | 0 | 0 | 0 |
| 1783354061 | 13.27 V | 46 mA | 0 | 0 | 0 |
| 1783352262 | 13.28 V | 47 mA | 0 | 0 | 0 |
| 1783350461 | 13.31 V | 52 mA | 0 | 0 | 0 |
| 1783348661 | 13.33 V | 51 mA | 0 | 0 | 0 |
| 1783346860 | 13.36 V | 53 mA | 0 | 0 | 0 |
| 1783345061 | 13.39 V | 45 mA | 0 | 0 | 0 |
| 1783343260 | 13.43 V | 52 mA | 0 | 0 | 0 |
| 1783341460 | 13.49 V | 50 mA | 0 | 0 | 0 |
*Used Equation Coefficients:
VBAT: 0, 0.01, 0
IBAT: 0, 1, -2000
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)