This is the latest recevied telemetry packets stored in our database for station/object SM7MDO-19. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787535795 | 3.85 VDC | 0 | 0 | 0 | 0 |
| 1787534891 | 3.86 VDC | 0 | 0 | 0 | 0 |
| 1787533986 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1787533083 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1787532178 | 3.89 VDC | 0 | 0 | 0 | 0 |
| 1787531275 | 3.9 VDC | 0 | 0 | 0 | 0 |
| 1787530371 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1787529467 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1787528562 | 3.93 VDC | 0 | 0 | 0 | 0 |
| 1787526755 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1787525851 | 3.96 VDC | 0 | 0 | 0 | 0 |
| 1787524946 | 3.97 VDC | 0 | 0 | 0 | 0 |
| 1787524042 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1787523138 | 3.99 VDC | 0 | 0 | 0 | 0 |
| 1787522234 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1787521330 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1787520426 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1787519523 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1787518618 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1787517714 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1787516811 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1787515907 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1787515003 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1787514099 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1787513195 | 4.1 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)