This is the latest recevied telemetry packets stored in our database for station/object YD2CFW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779029153 | 0 Count | 1005 Count | 0 Count | 0 VDC | 0 VDC |
| 1779027353 | 0 Count | 975 Count | 0 Count | 0 VDC | 0 VDC |
| 1779025553 | 0 Count | 949 Count | 0 Count | 0 VDC | 0 VDC |
| 1779023753 | 0 Count | 922 Count | 0 Count | 0 VDC | 0 VDC |
| 1779016764 | 0 Count | 922 Count | 0 Count | 0 VDC | 0 VDC |
| 1779014964 | 0 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1779013163 | 0 Count | 877 Count | 0 Count | 0 VDC | 0 VDC |
| 1779011363 | 0 Count | 873 Count | 0 Count | 0 VDC | 0 VDC |
| 1779009563 | 0 Count | 872 Count | 0 Count | 0 VDC | 0 VDC |
| 1779007763 | 0 Count | 871 Count | 0 Count | 0 VDC | 0 VDC |
| 1779005963 | 0 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1779004163 | 0 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
| 1779002363 | 0 Count | 865 Count | 0 Count | 0 VDC | 0 VDC |
| 1779000564 | 0 Count | 864 Count | 0 Count | 0 VDC | 0 VDC |
| 1778998764 | 0 Count | 862 Count | 0 Count | 0 VDC | 0 VDC |
| 1778996964 | 0 Count | 858 Count | 0 Count | 0 VDC | 0 VDC |
| 1778995164 | 0 Count | 856 Count | 0 Count | 0 VDC | 0 VDC |
| 1778993364 | 0 Count | 853 Count | 0 Count | 0 VDC | 0 VDC |
| 1778991563 | 0 Count | 853 Count | 0 Count | 0 VDC | 0 VDC |
| 1778989763 | 0 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1778987963 | 0 Count | 848 Count | 0 Count | 0 VDC | 0 VDC |
| 1778986163 | 0 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1778984363 | 0 Count | 843 Count | 0 Count | 0 VDC | 0 VDC |
| 1778982563 | 0 Count | 840 Count | 0 Count | 0 VDC | 0 VDC |
| 1778980763 | 0 Count | 836 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)