This is the latest recevied telemetry packets stored in our database for station/object DG6DXG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755784559 | 8.31 VDC | 1693 | 8109 | 0 | 0 |
| 1755784542 | 8.31 VDC | 1693 | 8097 | 0 | 0 |
| 1755784452 | 8.32 VDC | 1694 | 8115 | 0 | 0 |
| 1755784435 | 8.32 VDC | 1694 | 8096 | 0 | 0 |
| 1755784309 | 8.32 VDC | 1731 | 8084 | 0 | 0 |
| 1755784292 | 8.32 VDC | 1731 | 8079 | 0 | 0 |
| 1755784142 | 8.33 VDC | 1651 | 8063 | 0 | 0 |
| 1755784075 | 8.33 VDC | 1722 | 8082 | 0 | 0 |
| 1755783946 | 8.33 VDC | 1726 | 8077 | 0 | 0 |
| 1755783928 | 8.33 VDC | 1726 | 8075 | 0 | 0 |
| 1755783911 | 8.33 VDC | 1726 | 8072 | 0 | 0 |
| 1755783894 | 8.33 VDC | 1703 | 8069 | 0 | 0 |
| 1755783814 | 8.33 VDC | 1671 | 8070 | 0 | 0 |
| 1755783788 | 8.33 VDC | 1671 | 8074 | 0 | 0 |
| 1755783738 | 8.33 VDC | 1735 | 8075 | 0 | 0 |
| 1755783721 | 8.32 VDC | 1745 | 8084 | 0 | 0 |
| 1755783640 | 8.32 VDC | 1765 | 8079 | 0 | 0 |
| 1755783575 | 8.32 VDC | 1721 | 8080 | 0 | 0 |
| 1755783502 | 8.32 VDC | 1791 | 8074 | 0 | 0 |
| 1755783402 | 8.31 VDC | 1790 | 8080 | 0 | 0 |
| 1755783385 | 8.31 VDC | 1790 | 8080 | 0 | 0 |
| 1755783303 | 8.31 VDC | 1752 | 8080 | 0 | 0 |
| 1755783283 | 8.31 VDC | 1774 | 8088 | 0 | 0 |
| 1755783253 | 8.31 VDC | 1774 | 8084 | 0 | 0 |
| 1755783212 | 8.31 VDC | 1742 | 8080 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)