This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789220248 | 373 Count | 473 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1789219048 | 372 Count | 472 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1789217847 | 371 Count | 471 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1789216646 | 370 Count | 470 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1789215445 | 369 Count | 469 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1789214244 | 368 Count | 468 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1789213044 | 367 Count | 467 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1789211843 | 366 Count | 466 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1789210642 | 365 Count | 465 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1789209441 | 364 Count | 464 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1789208241 | 363 Count | 463 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1789207053 | 362 Count | 462 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789205852 | 361 Count | 461 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1789204651 | 360 Count | 460 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1789203450 | 359 Count | 459 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1789202250 | 358 Count | 458 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1789201049 | 357 Count | 457 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1789199848 | 356 Count | 451 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789198647 | 355 Count | 450 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1789197447 | 354 Count | 449 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1789196246 | 353 Count | 448 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789195045 | 352 Count | 447 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1789193844 | 351 Count | 446 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1789192644 | 350 Count | 443 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1789191443 | 349 Count | 440 Count | 0 Count | 4.34 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)