This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791231773 | 534 Count | 700 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1791230572 | 533 Count | 699 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791229371 | 532 Count | 692 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1791228171 | 531 Count | 691 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1791226983 | 530 Count | 691 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1791225782 | 529 Count | 690 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1791224581 | 528 Count | 689 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1791223380 | 527 Count | 688 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1791222180 | 526 Count | 687 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1791220979 | 525 Count | 686 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1791219778 | 524 Count | 685 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1791218578 | 523 Count | 684 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1791217377 | 522 Count | 683 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1791216176 | 521 Count | 682 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1791214975 | 520 Count | 681 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1791213774 | 519 Count | 680 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1791212574 | 518 Count | 679 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1791211373 | 517 Count | 678 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1791210172 | 516 Count | 677 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1791208971 | 515 Count | 676 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1791207771 | 514 Count | 669 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1791206570 | 513 Count | 668 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1791183782 | 494 Count | 645 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1791182581 | 493 Count | 644 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1791181380 | 492 Count | 643 Count | 0 Count | 4.32 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)