This is the latest recevied telemetry packets stored in our database for station/object VK2CPR-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793235672 | 684 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1793234507 | 682 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1793233300 | 680 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1793232094 | 678 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1793230887 | 676 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1793229680 | 674 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1793228474 | 672 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1793227304 | 670 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1793226098 | 668 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1793224891 | 666 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1793223684 | 664 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1793222478 | 662 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1793221271 | 660 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1793220106 | 658 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1793218899 | 656 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1793217692 | 654 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1793216486 | 652 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1793215279 | 650 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1793214072 | 648 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1793212903 | 646 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1793211696 | 644 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1793210490 | 642 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1793209283 | 640 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1793208076 | 638 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1793206870 | 636 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)