This is the latest recevied telemetry packets stored in our database for station/object SR3DPX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787124648 | 740 | 590 | 365 | 0 | 0 |
| 1787123747 | 707 | 572 | 350 | 0 | 0 |
| 1787122846 | 689 | 561 | 341 | 0 | 0 |
| 1787121945 | 678 | 552 | 335 | 0 | 0 |
| 1787121044 | 660 | 539 | 326 | 0 | 0 |
| 1787120143 | 634 | 525 | 313 | 0 | 0 |
| 1787119242 | 601 | 506 | 297 | 0 | 0 |
| 1787118341 | 578 | 491 | 285 | 0 | 0 |
| 1787117440 | 542 | 471 | 269 | 0 | 0 |
| 1787116539 | 502 | 447 | 249 | 0 | 0 |
| 1787115638 | 454 | 422 | 226 | 0 | 0 |
| 1787114737 | 412 | 399 | 205 | 0 | 0 |
| 1787113838 | 372 | 372 | 185 | 0 | 0 |
| 1787085952 | 371 | 372 | 185 | 0 | 0 |
| 1787085051 | 322 | 326 | 162 | 0 | 0 |
| 1787084150 | 254 | 268 | 129 | 0 | 0 |
| 1787082348 | 145 | 166 | 75 | 0 | 0 |
| 1787081448 | 112 | 127 | 58 | 0 | 0 |
| 1787080547 | 86 | 93 | 45 | 0 | 0 |
| 1787079646 | 51 | 50 | 27 | 0 | 0 |
| 1787078745 | 976 | 1032 | 493 | 0 | 0 |
| 1787077843 | 909 | 966 | 459 | 0 | 0 |
| 1787076942 | 860 | 920 | 436 | 0 | 0 |
| 1787076041 | 826 | 879 | 418 | 0 | 0 |
| 1787075140 | 788 | 840 | 399 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)