This is the latest recevied telemetry packets stored in our database for station/object SP1HSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781855033 | 363 Count | 897 Count | 349 Count | 4.14 VDC | 0.14 VDC |
| 1781853230 | 334 Count | 808 Count | 321 Count | 4.14 VDC | 0.14 VDC |
| 1781851427 | 315 Count | 760 Count | 303 Count | 4.14 VDC | 0.14 VDC |
| 1781849624 | 302 Count | 727 Count | 291 Count | 4.14 VDC | 0.14 VDC |
| 1781847821 | 272 Count | 638 Count | 262 Count | 4.14 VDC | 0.14 VDC |
| 1781846018 | 248 Count | 582 Count | 239 Count | 4.14 VDC | 0.14 VDC |
| 1781844215 | 223 Count | 496 Count | 215 Count | 4.14 VDC | 0.14 VDC |
| 1781842412 | 196 Count | 427 Count | 189 Count | 4.17 VDC | 0.14 VDC |
| 1781840645 | 181 Count | 384 Count | 175 Count | 4.13 VDC | 0.14 VDC |
| 1781838842 | 164 Count | 346 Count | 159 Count | 4.13 VDC | 0.14 VDC |
| 1781837039 | 125 Count | 273 Count | 121 Count | 4.13 VDC | 0.14 VDC |
| 1781835236 | 91 Count | 210 Count | 88 Count | 4.13 VDC | 0.14 VDC |
| 1781833433 | 63 Count | 152 Count | 61 Count | 4.13 VDC | 0.14 VDC |
| 1781831630 | 44 Count | 104 Count | 43 Count | 4.13 VDC | 0.14 VDC |
| 1781829827 | 20 Count | 51 Count | 20 Count | 4.13 VDC | 0.14 VDC |
| 1781828024 | 429 Count | 1002 Count | 407 Count | 4.13 VDC | 0.14 VDC |
| 1781826221 | 407 Count | 948 Count | 386 Count | 4.13 VDC | 0.14 VDC |
| 1781824418 | 389 Count | 908 Count | 369 Count | 4.13 VDC | 0.14 VDC |
| 1781822615 | 371 Count | 860 Count | 352 Count | 4.13 VDC | 0.14 VDC |
| 1781820812 | 357 Count | 827 Count | 339 Count | 4.13 VDC | 0.14 VDC |
| 1781819044 | 335 Count | 775 Count | 318 Count | 4.13 VDC | 0.14 VDC |
| 1781817241 | 319 Count | 733 Count | 303 Count | 4.13 VDC | 0.14 VDC |
| 1781815438 | 283 Count | 660 Count | 268 Count | 4.13 VDC | 0.14 VDC |
| 1781813635 | 262 Count | 621 Count | 248 Count | 4.13 VDC | 0.14 VDC |
| 1781811832 | 238 Count | 572 Count | 225 Count | 4.13 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)