This is the latest recevied telemetry packets stored in our database for station/object ON0DV-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792925933 | 0 Count | 10 Count | 0 Count | 0 VDC | 0 VDC |
| 1792923233 | 0 Count | 7 Count | 0 Count | 0 VDC | 0 VDC |
| 1792920533 | 0 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1792917833 | 0 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1792915133 | 0 Count | 2 Count | 0 Count | 0 VDC | 0 VDC |
| 1792912434 | 0 Count | 1012 Count | 0 Count | 0 VDC | 0 VDC |
| 1792909734 | 0 Count | 997 Count | 0 Count | 0 VDC | 0 VDC |
| 1792907034 | 0 Count | 995 Count | 0 Count | 0 VDC | 0 VDC |
| 1792904334 | 0 Count | 994 Count | 0 Count | 0 VDC | 0 VDC |
| 1792901634 | 0 Count | 992 Count | 0 Count | 0 VDC | 0 VDC |
| 1792898934 | 0 Count | 991 Count | 0 Count | 0 VDC | 0 VDC |
| 1792896234 | 0 Count | 990 Count | 0 Count | 0 VDC | 0 VDC |
| 1792893534 | 0 Count | 989 Count | 0 Count | 0 VDC | 0 VDC |
| 1792890833 | 0 Count | 988 Count | 0 Count | 0 VDC | 0 VDC |
| 1792888133 | 0 Count | 987 Count | 0 Count | 0 VDC | 0 VDC |
| 1792885433 | 0 Count | 985 Count | 0 Count | 0 VDC | 0 VDC |
| 1792882732 | 0 Count | 984 Count | 0 Count | 0 VDC | 0 VDC |
| 1792880033 | 0 Count | 982 Count | 0 Count | 0 VDC | 0 VDC |
| 1792877332 | 0 Count | 977 Count | 0 Count | 0 VDC | 0 VDC |
| 1792874633 | 0 Count | 976 Count | 0 Count | 0 VDC | 0 VDC |
| 1792871932 | 0 Count | 976 Count | 0 Count | 0 VDC | 0 VDC |
| 1792869233 | 0 Count | 975 Count | 0 Count | 0 VDC | 0 VDC |
| 1792866533 | 0 Count | 974 Count | 0 Count | 0 VDC | 0 VDC |
| 1792863833 | 0 Count | 972 Count | 0 Count | 0 VDC | 0 VDC |
| 1792861133 | 0 Count | 971 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)