This is the latest recevied telemetry packets stored in our database for station/object YE2YE-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1777498438 | 27 °C | 53 %RH | 999 hPa | 0 | 0 |
| 1777497738 | 27 °C | 52 %RH | 999 hPa | 0 | 0 |
| 1777494938 | 27 °C | 53 %RH | 999 hPa | 0 | 0 |
| 1777494924 | 27 °C | 53 %RH | 999 hPa | 0 | 0 |
| 1777490700 | 26 °C | 49 %RH | 1000 hPa | 0 | 0 |
| 1777487900 | 26 °C | 49 %RH | 1000 hPa | 0 | 0 |
| 1777481600 | 26 °C | 47 %RH | 1000 hPa | 0 | 0 |
| 1777478101 | 26 °C | 45 %RH | 1001 hPa | 0 | 0 |
| 1777477400 | 25 °C | 42 %RH | 1001 hPa | 0 | 0 |
| 1777473200 | 25 °C | 39 %RH | 1001 hPa | 0 | 0 |
| 1777466900 | 26 °C | 40 %RH | 1001 hPa | 0 | 0 |
| 1777465500 | 26 °C | 41 %RH | 1000 hPa | 0 | 0 |
| 1777462000 | 26 °C | 43 %RH | 1000 hPa | 0 | 0 |
| 1777461300 | 26 °C | 43 %RH | 1000 hPa | 0 | 0 |
| 1777455000 | 27 °C | 45 %RH | 997 hPa | 0 | 0 |
| 1777454300 | 27 °C | 45 %RH | 997 hPa | 0 | 0 |
| 1777450800 | 27 °C | 43 %RH | 996 hPa | 0 | 0 |
| 1777450100 | 27 °C | 43 %RH | 996 hPa | 0 | 0 |
| 1777449400 | 27 °C | 43 %RH | 996 hPa | 0 | 0 |
| 1777448000 | 27 °C | 43 %RH | 996 hPa | 0 | 0 |
| 1777443800 | 26 °C | 42 %RH | 997 hPa | 0 | 0 |
| 1777443100 | 26 °C | 42 %RH | 997 hPa | 0 | 0 |
| 1777440300 | 26 °C | 43 %RH | 998 hPa | 0 | 0 |
| 1777430500 | 26 °C | 43 %RH | 1001 hPa | 0 | 0 |
| 1777428400 | 25 °C | 44 %RH | 1001 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)