EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SK3BP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SK3BP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1793190679	129 Count	532 Count	112 Count
1793188876	120 Count	468 Count	104 Count
1793187073	111 Count	409 Count	96 Count
1793185269	101 Count	345 Count	87 Count
1793183466	92 Count	318 Count	79 Count
1793181663	82 Count	277 Count	70 Count
1793179895	70 Count	243 Count	63 Count
1793178092	61 Count	203 Count	55 Count
1793176289	52 Count	174 Count	47 Count
1793174486	44 Count	141 Count	40 Count
1793172683	36 Count	113 Count	33 Count
1793170879	27 Count	88 Count	25 Count
1793169076	17 Count	56 Count	16 Count
1793167273	8 Count	22 Count	8 Count
1793165470	337 Count	1036 Count	295 Count
1793163667	326 Count	988 Count	285 Count
1793161863	317 Count	960 Count	277 Count
1793158293	294 Count	913 Count	260 Count
1793156489	284 Count	891 Count	251 Count
1793154686	274 Count	850 Count	242 Count
1793152883	266 Count	824 Count	235 Count
1793151080	258 Count	799 Count	228 Count
1793149277	251 Count	763 Count	222 Count
1793147473	242 Count	740 Count	214 Count
1793145670	233 Count	701 Count	206 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)