This is the latest recevied telemetry packets stored in our database for station/object LW2DQC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789190787 | 399 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789188983 | 398 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789187180 | 397 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789185376 | 396 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789183573 | 395 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789181769 | 394 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789179965 | 393 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789178162 | 392 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789176399 | 391 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789174595 | 390 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789172792 | 389 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789170988 | 388 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789169185 | 387 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789167381 | 386 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789165578 | 385 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789163774 | 384 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789161970 | 383 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789160167 | 382 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789158363 | 381 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789156560 | 380 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789154799 | 379 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789152995 | 378 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789151192 | 377 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789149388 | 376 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789147585 | 375 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)