This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779731347 | 9 Count | 8 Count | 8 Count | 4.12 VDC | 0.14 VDC |
| 1779727741 | 0 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1779720437 | 563 Count | 1013 Count | 278 Count | 4.11 VDC | 0.14 VDC |
| 1779716832 | 546 Count | 997 Count | 262 Count | 4.15 VDC | 0.14 VDC |
| 1779713227 | 545 Count | 997 Count | 262 Count | 4.14 VDC | 0.14 VDC |
| 1779709622 | 544 Count | 997 Count | 262 Count | 4.16 VDC | 0.14 VDC |
| 1779706016 | 543 Count | 997 Count | 262 Count | 4.12 VDC | 0.14 VDC |
| 1779702443 | 542 Count | 997 Count | 262 Count | 4.15 VDC | 0.14 VDC |
| 1779698837 | 541 Count | 997 Count | 262 Count | 4.21 VDC | 0.14 VDC |
| 1779695232 | 540 Count | 997 Count | 262 Count | 4.14 VDC | 0.14 VDC |
| 1779691627 | 539 Count | 997 Count | 262 Count | 4.21 VDC | 0.14 VDC |
| 1779688022 | 538 Count | 997 Count | 262 Count | 4.2 VDC | 0.14 VDC |
| 1779684417 | 537 Count | 997 Count | 262 Count | 4.21 VDC | 0.14 VDC |
| 1779680841 | 536 Count | 997 Count | 262 Count | 4.13 VDC | 0.14 VDC |
| 1779677236 | 535 Count | 997 Count | 262 Count | 4.13 VDC | 0.14 VDC |
| 1779673631 | 534 Count | 997 Count | 262 Count | 4.19 VDC | 0.14 VDC |
| 1779670025 | 533 Count | 997 Count | 262 Count | 4.14 VDC | 0.14 VDC |
| 1779666420 | 532 Count | 997 Count | 262 Count | 4.13 VDC | 0.14 VDC |
| 1779662815 | 530 Count | 996 Count | 261 Count | 4.11 VDC | 0.14 VDC |
| 1779659243 | 529 Count | 996 Count | 261 Count | 4.12 VDC | 0.14 VDC |
| 1779655638 | 528 Count | 995 Count | 261 Count | 4.14 VDC | 0.14 VDC |
| 1779652032 | 526 Count | 993 Count | 260 Count | 4.21 VDC | 0.14 VDC |
| 1779648427 | 524 Count | 992 Count | 259 Count | 4.2 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)