This is the latest recevied telemetry packets stored in our database for station/object IT9CGR-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791208240 | 476 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1791207938 | 475 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1791207635 | 474 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1791207332 | 473 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1791207029 | 472 Count | 0 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1791206726 | 471 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1791206423 | 470 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1791206120 | 469 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1791205817 | 468 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1791205515 | 467 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1791205212 | 466 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1791204909 | 465 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1791204606 | 464 Count | 0 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1791204303 | 463 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1791204000 | 462 Count | 0 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1791203697 | 461 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1791203394 | 460 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1791203091 | 459 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1791202789 | 458 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1791202486 | 457 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1791202183 | 456 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1791201880 | 455 Count | 0 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1791201577 | 454 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1791201274 | 453 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1791200971 | 452 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)