This is the latest recevied telemetry packets stored in our database for station/object OK4JL-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789130128 | 3.78 V | 37 | 0 | 0 | 0 |
| 1789130068 | 3.78 V | 38 | 0 | 0 | 0 |
| 1789129948 | 3.79 V | 38 | 0 | 0 | 0 |
| 1789129888 | 3.78 V | 37 | 0 | 0 | 0 |
| 1789129828 | 3.81 V | 38 | 0 | 0 | 0 |
| 1789129768 | 3.78 V | 36 | 0 | 0 | 0 |
| 1789129708 | 3.8 V | 37 | 0 | 0 | 0 |
| 1789129588 | 3.81 V | 35 | 0 | 0 | 0 |
| 1789129528 | 3.79 V | 35 | 0 | 0 | 0 |
| 1789129408 | 3.81 V | 36 | 0 | 0 | 0 |
| 1789129348 | 3.79 V | 35 | 0 | 0 | 0 |
| 1789129228 | 3.8 V | 35 | 0 | 0 | 0 |
| 1789129168 | 3.81 V | 35 | 0 | 0 | 0 |
| 1789129048 | 3.82 V | 34 | 0 | 0 | 0 |
| 1789128988 | 3.81 V | 35 | 0 | 0 | 0 |
| 1789128868 | 3.81 V | 35 | 0 | 0 | 0 |
| 1789128808 | 3.82 V | 35 | 0 | 0 | 0 |
| 1789128688 | 3.82 V | 35 | 0 | 0 | 0 |
| 1789128628 | 3.81 V | 38 | 0 | 0 | 0 |
| 1789128568 | 3.82 V | 37 | 0 | 0 | 0 |
| 1789128508 | 3.82 V | 38 | 0 | 0 | 0 |
| 1789128448 | 3.85 V | 39 | 0 | 0 | 0 |
| 1789128328 | 3.85 V | 34 | 0 | 0 | 0 |
| 1789128268 | 3.84 V | 34 | 0 | 0 | 0 |
| 1789128088 | 3.85 V | 34 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)