This is the latest recevied telemetry packets stored in our database for station/object LB4FH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | GAS* |
|---|---|---|---|---|---|
| 1774373007 | 4.15 | 24.3 | 42.08 | 1000.25 | 32.12 |
| 1774372104 | 4.14 | 24.5 | 41.98 | 999.75 | 31.73 |
| 1774371201 | 4.15 | 24.5 | 42.44 | 1000.38 | 31.28 |
| 1774370298 | 4.14 | 24.2 | 43.25 | 1001 | 30.46 |
| 1774369395 | 4.15 | 24.9 | 42.36 | 1000.88 | 29.72 |
| 1774368492 | 4.15 | 24.6 | 43.01 | 1001.63 | 29.53 |
| 1774367589 | 4.15 | 24.7 | 43.17 | 1001.75 | 28.61 |
| 1774366686 | 4.15 | 24.8 | 42.17 | 1003 | 28.32 |
| 1774365783 | 4.15 | 24.6 | 42.69 | 1002.13 | 29.27 |
| 1774364880 | 4.15 | 24.8 | 42.65 | 1002.75 | 28.82 |
| 1774363977 | 4.14 | 24.6 | 41.2 | 1003.13 | 30.5 |
| 1774363074 | 4.15 | 24.7 | 40.05 | 1002.38 | 31.37 |
| 1774362171 | 4.15 | 24.8 | 39.82 | 1003.25 | 31.3 |
| 1774361268 | 4.15 | 24.8 | 40.99 | 1002.75 | 30.73 |
| 1774360365 | 4.15 | 24.9 | 39.5 | 1002.75 | 30.98 |
| 1774359462 | 4.15 | 24.8 | 39.08 | 1003.38 | 31.82 |
| 1774358559 | 4.15 | 25.3 | 38.04 | 1002.75 | 31.25 |
| 1774357656 | 4.15 | 25.3 | 37.96 | 1003.25 | 31.92 |
| 1774356753 | 4.15 | 25.9 | 36.68 | 1003.25 | 32.44 |
| 1774355850 | 4.15 | 26.3 | 36.09 | 1003.38 | 32.51 |
| 1774354947 | 4.15 | 25.6 | 36.93 | 1004 | 33.96 |
| 1774354044 | 4.15 | 25.7 | 36.86 | 1004.25 | 34.72 |
| 1774353141 | 4.15 | 25.6 | 36.51 | 1004.5 | 35.01 |
| 1774352238 | 4.15 | 25 | 37.48 | 1004.13 | 35.34 |
| 1774351334 | 4.15 | 25.1 | 37.46 | 1003.75 | 35.28 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
GAS: 0, 0.01, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)