This is the latest recevied telemetry packets stored in our database for station/object SV6GIM-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1784675712 | 31.5 C | 1024.13 hPa | 0 | 0 | 0 |
| 1784669726 | 34.1 C | 1027.13 hPa | 0 | 0 | 0 |
| 1784669436 | 34.1 C | 1027.25 hPa | 0 | 0 | 0 |
| 1784669225 | 34.1 C | 1027.38 hPa | 0 | 0 | 0 |
| 1784669010 | 34.1 C | 1026.13 hPa | 0 | 0 | 0 |
| 1784668655 | 34.1 C | 1025.25 hPa | 0 | 0 | 0 |
| 1784665582 | 34 C | 1018.13 hPa | 0 | 0 | 0 |
| 1784665373 | 34.1 C | 1019.63 hPa | 0 | 0 | 0 |
| 1784665043 | 34.1 C | 1010.38 hPa | 0 | 0 | 0 |
| 1784663640 | 34.5 C | 1010.5 hPa | 0 | 0 | 0 |
| 1784663590 | 34.5 C | 1010.38 hPa | 0 | 0 | 0 |
| 1784663568 | 34.5 C | 1019.88 hPa | 0 | 0 | 0 |
| 1784663488 | 34.4 C | 1019.75 hPa | 0 | 0 | 0 |
| 1784663232 | 34.4 C | 1019 hPa | 0 | 0 | 0 |
| 1784658398 | 37.5 C | 1019.38 hPa | 0 | 0 | 0 |
| 1784658236 | 37.4 C | 1016.88 hPa | 0 | 0 | 0 |
| 1784658044 | 37.5 C | 1018.13 hPa | 0 | 0 | 0 |
| 1784657415 | 37.6 C | 1017.63 hPa | 0 | 0 | 0 |
| 1784656579 | 37.8 C | 1017.75 hPa | 0 | 0 | 0 |
| 1784656381 | 38.2 C | 1017.38 hPa | 0 | 0 | 0 |
| 1784656188 | 38.3 C | 1009.75 hPa | 0 | 0 | 0 |
| 1784651752 | 40.7 C | 1018.25 hPa | 0 | 0 | 0 |
| 1784642720 | 42.7 C | 1019 hPa | 0 | 0 | 0 |
| 1784633690 | 42.7 C | 1019.5 hPa | 0 | 0 | 0 |
| 1784629051 | 42.6 C | 1019.25 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)