This is the latest recevied telemetry packets stored in our database for station/object SV6DBG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1777497963 | 3.84 VDC | 22 | 0 | 0 | 0 |
| 1777497243 | 3.85 VDC | 22 | 0 | 0 | 0 |
| 1777495802 | 3.85 VDC | 22 | 0 | 0 | 0 |
| 1777495082 | 3.85 VDC | 22 | 0 | 0 | 0 |
| 1777494362 | 3.85 VDC | 22 | 0 | 0 | 0 |
| 1777493642 | 3.85 VDC | 22 | 0 | 0 | 0 |
| 1777492202 | 3.85 VDC | 22 | 0 | 0 | 0 |
| 1777491481 | 3.85 VDC | 22 | 0 | 0 | 0 |
| 1777490761 | 3.85 VDC | 22 | 0 | 0 | 0 |
| 1777490041 | 3.86 VDC | 22 | 0 | 0 | 0 |
| 1777488600 | 3.85 VDC | 22 | 0 | 0 | 0 |
| 1777487880 | 3.86 VDC | 22 | 0 | 0 | 0 |
| 1777487160 | 3.86 VDC | 22 | 0 | 0 | 0 |
| 1777486441 | 3.86 VDC | 22 | 0 | 0 | 0 |
| 1777485006 | 3.87 VDC | 31 | 0 | 0 | 0 |
| 1777484279 | 3.87 VDC | 119 | 0 | 0 | 0 |
| 1777483559 | 3.87 VDC | 192 | 0 | 0 | 0 |
| 1777482839 | 3.87 VDC | 211 | 0 | 0 | 0 |
| 1777482119 | 3.87 VDC | 214 | 0 | 0 | 0 |
| 1777481399 | 3.88 VDC | 227 | 0 | 0 | 0 |
| 1777480678 | 3.88 VDC | 234 | 0 | 0 | 0 |
| 1777479958 | 3.88 VDC | 235 | 0 | 0 | 0 |
| 1777479238 | 3.88 VDC | 234 | 0 | 0 | 0 |
| 1777477798 | 3.89 VDC | 235 | 0 | 0 | 0 |
| 1777477078 | 3.89 VDC | 238 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)