This is the latest recevied telemetry packets stored in our database for station/object SR2GG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773351647 | 84 Count | 346 Count | 51 Count | 4.23 VDC | 0 VDC |
| 1773350206 | 80 Count | 329 Count | 48 Count | 4.21 VDC | 0 VDC |
| 1773348765 | 76 Count | 316 Count | 45 Count | 4.2 VDC | 0 VDC |
| 1773347324 | 74 Count | 311 Count | 44 Count | 4.2 VDC | 0 VDC |
| 1773345884 | 70 Count | 292 Count | 41 Count | 4.2 VDC | 0 VDC |
| 1773344450 | 67 Count | 277 Count | 39 Count | 4.22 VDC | 0 VDC |
| 1773343009 | 59 Count | 268 Count | 38 Count | 4.2 VDC | 0 VDC |
| 1773341568 | 57 Count | 255 Count | 37 Count | 4.22 VDC | 0 VDC |
| 1773340128 | 54 Count | 245 Count | 35 Count | 4.22 VDC | 0 VDC |
| 1773338687 | 51 Count | 233 Count | 33 Count | 4.2 VDC | 0 VDC |
| 1773337246 | 49 Count | 215 Count | 32 Count | 4.22 VDC | 0 VDC |
| 1773335805 | 45 Count | 204 Count | 29 Count | 4.22 VDC | 0 VDC |
| 1773334365 | 42 Count | 195 Count | 27 Count | 4.2 VDC | 0 VDC |
| 1773332924 | 40 Count | 182 Count | 26 Count | 4.21 VDC | 0 VDC |
| 1773331483 | 36 Count | 167 Count | 23 Count | 4.21 VDC | 0 VDC |
| 1773330042 | 32 Count | 155 Count | 20 Count | 4.21 VDC | 0 VDC |
| 1773328602 | 28 Count | 139 Count | 17 Count | 4.21 VDC | 0 VDC |
| 1773327161 | 24 Count | 124 Count | 14 Count | 4.23 VDC | 0 VDC |
| 1773325720 | 18 Count | 104 Count | 9 Count | 4.22 VDC | 0 VDC |
| 1773324279 | 14 Count | 81 Count | 6 Count | 4.21 VDC | 0 VDC |
| 1773324210 | 13 Count | 80 Count | 6 Count | 4.2 VDC | 0 VDC |
| 1773323861 | 12 Count | 80 Count | 6 Count | 4.21 VDC | 0 VDC |
| 1773323518 | 9 Count | 73 Count | 4 Count | 4.21 VDC | 0 VDC |
| 1773323228 | 8 Count | 72 Count | 4 Count | 4.22 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)