This is the latest recevied telemetry packets stored in our database for station/object DO2HN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789244001 | 23.3 C | 31.22 % | 1026.75 hPa | 0 | 0 |
| 1789243097 | 23.8 C | 31.21 % | 1028.25 hPa | 0 | 0 |
| 1789242193 | 24.2 C | 31.08 % | 1027.63 hPa | 0 | 0 |
| 1789241288 | 24.7 C | 30.6 % | 1027.13 hPa | 0 | 0 |
| 1789240385 | 25.2 C | 30.4 % | 1026.38 hPa | 0 | 0 |
| 1789239481 | 25.8 C | 30 % | 1025.13 hPa | 0 | 0 |
| 1789238576 | 26.5 C | 29.49 % | 1025.5 hPa | 0 | 0 |
| 1789237672 | 27.3 C | 29.27 % | 1030 hPa | 0 | 0 |
| 1789236769 | 27.8 C | 29.11 % | 1027.13 hPa | 0 | 0 |
| 1789236741 | 27.8 C | 29.11 % | 1026.63 hPa | 0 | 0 |
| 1789236725 | 27.7 C | 29.7 % | 1026 hPa | 0 | 0 |
| 1789236708 | 27.7 C | 29.7 % | 1026 hPa | 0 | 0 |
| 1789236683 | 27.7 C | 29.7 % | 1025.25 hPa | 0 | 0 |
| 1789236663 | 27.7 C | 29.56 % | 1025.75 hPa | 0 | 0 |
| 1789236647 | 27.7 C | 29.56 % | 1025.5 hPa | 0 | 0 |
| 1789236600 | 27.6 C | 29.19 % | 1025.38 hPa | 0 | 0 |
| 1789236584 | 27.6 C | 29.19 % | 1025 hPa | 0 | 0 |
| 1789236568 | 27.6 C | 29.19 % | 1024.5 hPa | 0 | 0 |
| 1789236552 | 27.6 C | 28.96 % | 1024.13 hPa | 0 | 0 |
| 1789236536 | 27.6 C | 28.96 % | 1023.25 hPa | 0 | 0 |
| 1789236520 | 27.6 C | 28.96 % | 1023.5 hPa | 0 | 0 |
| 1789236503 | 27.6 C | 28.96 % | 1024.63 hPa | 0 | 0 |
| 1789236406 | 27.4 C | 27.03 % | 1024.75 hPa | 0 | 0 |
| 1789236390 | 27.4 C | 27.03 % | 1025.25 hPa | 0 | 0 |
| 1789236367 | 27.4 C | 26.94 % | 1023.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)