This is the latest recevied telemetry packets stored in our database for station/object DO2HN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785072388 | 45 C | 15.84 % | 1008.13 hPa | 0 | 0 |
| 1785070580 | 39.9 C | 16.9 % | 1008.38 hPa | 0 | 0 |
| 1785069676 | 38.8 C | 14.22 % | 1009.5 hPa | 0 | 0 |
| 1785069660 | 38.8 C | 14.22 % | 1009.13 hPa | 0 | 0 |
| 1785069635 | 38.8 C | 14.22 % | 1009 hPa | 0 | 0 |
| 1785069615 | 39 C | 15.45 % | 1011.13 hPa | 0 | 0 |
| 1785069599 | 39 C | 15.45 % | 1010 hPa | 0 | 0 |
| 1785069555 | 39 C | 15.45 % | 1008.88 hPa | 0 | 0 |
| 1785069538 | 39.3 C | 12.73 % | 1009 hPa | 0 | 0 |
| 1785069409 | 40 C | 13.71 % | 1008.13 hPa | 0 | 0 |
| 1785069320 | 40.3 C | 14.16 % | 1010.25 hPa | 0 | 0 |
| 1785069304 | 40.3 C | 13.1 % | 1010.88 hPa | 0 | 0 |
| 1785069280 | 40.3 C | 13.1 % | 1011.5 hPa | 0 | 0 |
| 1785069233 | 40.4 C | 13.04 % | 1011.13 hPa | 0 | 0 |
| 1785069202 | 40.4 C | 13.04 % | 1012.13 hPa | 0 | 0 |
| 1785069156 | 40.6 C | 13.38 % | 1012.75 hPa | 0 | 0 |
| 1785069134 | 40.6 C | 13.38 % | 1012.38 hPa | 0 | 0 |
| 1785069039 | 41.5 C | 12.47 % | 1010.13 hPa | 0 | 0 |
| 1785069006 | 41.5 C | 12.47 % | 1009.75 hPa | 0 | 0 |
| 1785068958 | 42.2 C | 12.51 % | 1009 hPa | 0 | 0 |
| 1785068871 | 44 C | 13.52 % | 1008.25 hPa | 0 | 0 |
| 1785068814 | 44.1 C | 15.87 % | 1006.88 hPa | 0 | 0 |
| 1785065694 | 40.1 C | 15.06 % | 1008.38 hPa | 0 | 0 |
| 1785065645 | 40.5 C | 16.37 % | 1008 hPa | 0 | 0 |
| 1785065629 | 40.5 C | 16.37 % | 1008.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)