This is the latest recevied telemetry packets stored in our database for station/object YD1AFF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatu* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1776234269 | 38 °C | 41 %RH | 1005 hPa | 0 | 0 |
| 1776232369 | 38 °C | 39 %RH | 1006 hPa | 0 | 0 |
| 1776230469 | 40 °C | 37 %RH | 1006 hPa | 0 | 0 |
| 1776228569 | 40 °C | 35 %RH | 1007 hPa | 0 | 0 |
| 1776226669 | 42 °C | 34 %RH | 1007 hPa | 0 | 0 |
| 1776224769 | 44 °C | 33 %RH | 1008 hPa | 0 | 0 |
| 1776222869 | 43 °C | 35 %RH | 1008 hPa | 0 | 0 |
| 1776220969 | 42 °C | 39 %RH | 1008 hPa | 0 | 0 |
| 1776219069 | 39 °C | 42 %RH | 1009 hPa | 0 | 0 |
| 1776217169 | 38 °C | 45 %RH | 1008 hPa | 0 | 0 |
| 1776215269 | 36 °C | 50 %RH | 1008 hPa | 0 | 0 |
| 1776213368 | 34 °C | 56 %RH | 1008 hPa | 0 | 0 |
| 1776211468 | 32 °C | 60 %RH | 1008 hPa | 0 | 0 |
| 1776209568 | 29 °C | 63 %RH | 1007 hPa | 0 | 0 |
| 1776207668 | 28 °C | 64 %RH | 1007 hPa | 0 | 0 |
| 1776205768 | 28 °C | 64 %RH | 1007 hPa | 0 | 0 |
| 1776203868 | 28 °C | 64 %RH | 1006 hPa | 0 | 0 |
| 1776201968 | 28 °C | 66 %RH | 1007 hPa | 0 | 0 |
| 1776200068 | 29 °C | 65 %RH | 1007 hPa | 0 | 0 |
| 1776198168 | 29 °C | 64 %RH | 1007 hPa | 0 | 0 |
| 1776196268 | 29 °C | 64 %RH | 1007 hPa | 0 | 0 |
| 1776194368 | 29 °C | 63 %RH | 1007 hPa | 0 | 0 |
| 1776192468 | 29 °C | 61 %RH | 1007 hPa | 0 | 0 |
| 1776190568 | 29 °C | 61 %RH | 1008 hPa | 0 | 0 |
| 1776188668 | 29 °C | 60 %RH | 1008 hPa | 0 | 0 |
*Used Equation Coefficients:
Temperatu: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)